365betball-365betapp苹果

365betball-365betapp苹果

标志

集装箱工具库

Updated: Jun 19, 2021 | Container tool shak

This site contains affiliate links to products. We may receive a commission for purchases made through these links.

海运集装箱工具摇动

海运集装箱工具摇动

Shipping 容器 are some of the best options for extra 存储 space. here we are converting a 20 ft 标准身高 集装箱 to a tool 存储 shak.

We can't claim that the container convertion idea was ours as it was requested from one of our customer that happend to be a big construction company. 的y needed a solutoin for their large amount of construction tools.

的 company ordered two 20 foot 集装箱 that need to be converted into a tool 存储 units with 6 foot roll up door on each, 两个装有百叶窗板的通风口, 两个4英尺的顶灯, two quad electrical receptacle and a four 层 wood shelving.

的 one thing that caught our attention was the 4 层 wood shelving that have to be in a ( J ) shape wrapped inside the 集装箱.

我们开始思考为什么要用木头架子? 为什么不是钢架子? the 集装箱 is built from steel except the floor of course. It will be a much easier to at lease build the framing from steel. But at the end it's what the customer wanted and that's what the customer gets.

Shipping container tools 存储 conversion

  • 1
    金属卷帘门.
  • 我们从 卷起的门 as they are easy to install "We install hundreds of them". 我们要把他们干掉,别挡我们的路. Since we are using the same tools and materials we did both doors one after the other.

  • 2
    装有百叶窗板的通风口.
  • 接下来我们开始安装 装有百叶窗板的通风口. All four vents, Two vents for each container on apposite sides got installed at one shot. Mark, Cut, Install,Weld, Clean, Paint and done.

  • 3
    电和照明.
  • 接下来是电气部分. 的 天花板 灯 were the easy part as they are completely out of the way of the shelving. 但是其中一个 quad receptacles has to be centered on the side wall and in between the second and the third shelving 层. So the electrical plumbing had to be well thought of before start weld tacking the junction boxes 在适当的位置.

    We start with the junction box that feeds the 天花板 灯 which was mounted at the top center of the 前壁. 其余的一切都很顺利.

  • 4
    工具木头架子.
  • This was suppose to be the easiest part of the whole modification. 是2X4的钉和一些胶合板 这可能很难. 正确的!.

    结果是一场噩梦. How to fasten the 2X4 wood studs to the steel walls without using steel 焊接在墙上的托架. If we do that "Using welded steel brackets" on a four 层 shelving we have to wire wheel the weld burns from the outside and have to paint the whole container. 这是不 一个选项. 这是新的20英尺 航运 容器 毕竟. And we wanted to keep them as clean as possible.

    After some thinking we end up using a steel flat bar fasten to the top of the 2X4 wooden studs and bolted to the top rail tube, the 2X4 is setting in the cavity of the corrugations to save on space. "No 焊接 & 外面没有洞". 很酷的.

    的 other issue that arises was centering the vertical 2X4 wood studs at 4 feet apart. 装运 container steel wall corrugation did not cooperate at all and we still have the junction box in the center of the wall that need to be taking in consideration too.

At this point of building the 集装箱 tools shak it came down to saving lumber or saving time. So we choose the saving time option and we went for it.

It really looked and sounded simple to install wood shelving in a 存储 集装箱. But the amount of time it took to cut, drill and fasten all that shelving lumber was unexpected.

集装箱工具库 Lighting
集装箱百叶通风口

我们完成了吗?

的 集装箱 tool 存储 "Shak" was done on time. And the customer was really happy with the results.

的 shelving inside the 海运集装箱工具摇动 turn out to be verry strong and sturdy, It should handle much more than just storing tools.

Drilling pilot holes in the 2X4 wood studs before driving the screws, saves the shelves framing from crackes and splits.

的 electrical conduit comming down the walls end up flush with the horizontal 2X4. 的re was no need to notch the wood to clear the conduit.

Another 集装箱 modification done. 另一个快乐的客户.

Final thoughts on this 集装箱 Shed

别误会我. 我知道顾客永远是对的. And this 集装箱 tool 存储 came out exactly as the customer wanted.

的 only thing i would done differently or changed in this mod is the container it self. If i am in need of four 层 shelving i would have went with a 高集装箱 而不是 标准身高. That will give me a lot more room for the shelves.

One other thing i would have done is the position of the 装有百叶窗板的通风口. I would have installed one vent on the right side front top and the other on lift side rear bottom, this way the container get a better air circulation. Cold dry air comes in from the bottom vent and worm moist air exhaust from the top vent.

Shipping container modifications is what we do

版权:©2021
365betapp苹果